Clamps

Used to form guy loops that attach to anchor rods. Parallel grooves accept strand without marring. Plate halves align evenly for ease of installation. Plate length is 5-7/8" and plate width is 1-21/32". Strand Sizes accommodated are 1/4" - 1/2". Comprised of two plates and three 5/8" X 1-3/4" Carriage Bolts with Regular Square Nuts. Hot dip galvanized to meet ASTM Specification A153.Standard Package: 25 each.

Used for attaching strand to corner poles. Accepts 1/4" (6.6m) to 7/16" (16m) strand. Clamp consists of two mating plates, two 5/8"-11 track bolts with attached square nuts. Clamp plates are 2-3/16" wide and 7" long. One plate is flared at each end to facilitate pulling strand through the clamp and has a substantial projecting lip to retain the strand in the grooves. The center hole on the B Corner Suspension Camp is for use with a 5/8" or 3/4" diameter bolt. CATV...

Made to Bellcore Specification 8623. PID Number: 400 762 282. Designed to securely grip messenger cable. Clamps accept 1/4" (6.6M) to 7/16" (16M) messenger strand. Made from rolled, high quality steel, hot dip galvanized per ASTM A153 for maximum corrosion protection. Furnished with two 1/2" track bolts and square nuts. Mount messenger assembly to pole with a 5/8" bolt thru center hole.  Standard carton: 25 each.

Used in aerial construction at the mid-span to clamp two strands together perpendicularly.Casted from Ductile Iron for strength.Hot dip galvanized to meet ASTM Specification A153.Standard Package: 25 each.

Used in aerial construction at the mid-span to clamp two 1/4" strands together perpendicularly.Crossover plates are tapped to eliminate the handling of loose nuts. Stamped from AISI 1008 Steel. Hot dip galvanized to meet ASTM Specification A153Standard Carton: 50 each.

Used to strain relieve telephone drop wire. Designed to be used to support 1 through 2 pair drop wires. Removable. Stainless steel construction. 3-piece construction. Standard Carton: 250 each.

Used to form guy loops that attach to anchor rods. Parallel grooves accept strand without marring. Plate halves align evenly for ease of installation. Plate length is 1-7/16" and plate width is 1-9/16". Strand sizes accommodated are 3/16" - 3/8". Comprised with 2 plates and one 1/2" X 1-1/2" Carriage Bolt with one Regular Square Nut. Hot dip galvanized to meet ASTM Specification A153.Standard Package: 50 ea.

Used in aerial construction to secure terminating lashing wire or ground wire to a strand.Tensile strength of the jaws exceeds 50,000 PSI. Terminal ends of stud are staked to prevent disassembly during shipping and installation. Attaches to strand ranging in size from 1/4"(6.6M) to 7/16"(16M). The jaws are rolled and stamped from annealed 1018 Steel. The stud of the D Cable Lashing Clamp is formed from Grade 5 Steel. All components of D Cable Lashing Clamps are mechanically galvanized to meet...

Used to secure a terminating lashing wire to the strand.Comprised of a one-piece jaw, two washers, two nuts, and a square shank stud. Terminal ends of stud are staked to prevent disassembly during shipping and installation. The jaws are stamped from AISI 1018 Cold Rolled Steel. The stud is formed from Grade 5 hardened Steel. The nuts and washers are formed from Grade 2 Steel. All components are mechanically galvanized to meet ASTM Specification B695.Standard Carton: 200 each. (4 packs of 50...

Bellcore Specification 7886. PID Number: 400 121 349. Designed for 1/4" (6.6M) to 7/16" (16M) messenger strand. Designed for easy and permanent termination of lashing wire to messenger strand. Constructed of high quality steel, mechanically plated per ASTM B695. Standard Package: 50 each.

Used to attach strand to straight line poles. Accepts 1/4" (6.6M) to 7/16" (16M) strand. Consists of two plates, and two 1/2"-13 track bolts with attached square nuts. Plates are 1-11/16" wide and 5-3/4" long. Center hole accepts 5/8" Thru Bolts. Hot dip galvanized to meet ASTM Specification A153.Standard Package: 25 each.

Designed to securely grip messenger cable. Clamps accept 1/4" (6.6M) to 7/16" (16M) messenger strand. Made from rolled, high quality steel, hot dip galvanized per ASTM A153 for maximum corrosion protection. Furnished with two 1/2" track bolts and square nuts. Mount messenger assembly to pole with a 5/8" bolt thru center hole. Standard Package: 25 each.

Used for attaching strand to corner poles.  Accepts 1/4" (6.6m) to 7/16" (16m) strand. Clamp consists of two mating plates, two 5/8"-11 track bolts with attached square nuts. Clamp plates are 1-11/16" wide and 7-1/4" long. One plate is flared at each end to facilitate pulling strand through the clamp and has a substantial projecting lip to retain the strand in the grooves. The center hole on the B Corner Suspension Camp is for use with a 5/8" or 3/4" diameter...

Used to attach strand to straight line poles. Accepts 1/4" (6.6M) to 7/16" (16M) strand. Consists of two plates,and two 1/2"-13 track bolts with attached square nuts. Plates are 1-13/16" wide and 5-3/4" long. Hot dip galvanized to meet ASTM Specification A153.Standard Package: 25 each.