OSP Tools

Cable tracing kit with advanced new features to give a complete signal tracing solution. Kit includes: Tone Generator #62-160 Amplifier Probe #62-164 Soft Black Nylon Carrying Case Cable Assemblies and Flat Tip.

(Includes scissors, splicing knife and leather holder.

Pole, Jameson Safe Stik, Extension Pole, Foam Core, 100KV, Female Ferrule and Male Ferrule, 6' Section

For use in telephone and electrical service applications. Cuts up to #16 AWG solid and #12 AWG stranded wire. Stripping notches, serrated surface on back side of the blade, strips #19 AWG and #23 AWG wire.

U-TECK has combined a longtime, craft-accepted design with a new polyethylene material to produce a rugged splicer seat that can be warranted for up to five years. With the U-TECK Splicer Seat, there is never a need for water treatment because it is waterproof. No need for painting, either; the color is molded into the seat. And no worries about splintering. It is ouchless! This seat can be drilled to attach other equipment, such as splicing machines. U-TECK has even included a handy tool slot...

Auto adjusting blade depth for 6/6Quad/59 coax cable. 1/4" x 1/4" COAX preparation. Replacement blade cartridges. CAT 5e/6 jacket stripping.  Spring loaded for consistent cutting force.

Small stripping v-notch is designed to remove buffer and coating material from 125u fiber.  Large stripping v-notch is designed to strip wide range of outer cable jacket insulations.  Blade area heat-treated for durability.  Laser marked for easy identification.  Extra durable to withstand normal drops without requiring tool realignment.

Durable, impact-resistant case for the most rugged job site conditions. Impact-resistant ABS case won't rust or dent. Blued steel 50 ft length. Blued steel is an exclusive IDEAL innovation. Constructed of highest grade tempered steel and put through our proprietary finishing process, it offers a smooth finish for superior performance and rust resistance. Use blued steel for easier feeding into conduit, easier winding in and winding out. Laser etched every 12".

Used to tension and fasten banding to poles.Tool includes a spring-loaded gripper lever for superior band tensioning. Tool is equipped with a friction held cutoff lever with plastic grip for easy operation. Tool is treated with a permanent lubrication on the tensioning screw to extend tool life and speed clamping. The spin handle retaining-ring keeps parts intact. The Giant Band Tool is designed to pull up to 6,000 lbs.Standard Package: 1 each. ...

Includes 50' Air Hose