Grounding and Bonding

Used to bond #6 copper wire to 1/4" or 5/16" strand. Constructed of high strength copper alloy. Installation does not require removal of bolt. Tin plated for use with dissimilar metals. Installs with standard terminal wrench. UL and CUL listed. Standard Package: 100 each, 4 Pack per Carton of 400 each.

Used to bond 1/4" and 5/16" galvanized strand to #6 AWG copper ground wire. Standard carton: 400 each.

Standard Carton:   400 each (100 packs per carton)

Standard Package:  50 each.

Standard Package:  400 each (4 packs of 100ea)

Clamp, Ground Rod, CadWeld One shot, “T” for #6 stranded ground wire to a 5/8” ground rod. Must be ordered in carton quantity of 6.

Accommodates #12–2 AWG Universal, Bronze

Used to secure cable sheath, bonding ribbon, or ground wire to strand.The clamp has an internal self-seating compression plate to evenly distribute clamping pressure. Clamp includes a 1/2" x 1-1/2" square head machine bolt and 1/2-13 regular square nut. Outside “U” channel is formed from .187" x 1-1/2" gauge Steel. Internal self-seating compression plate is formed from .125" x 1/2" gauge Steel. Hot dip galvanized to meet ASTM Specification A153.Accommodates strand from 3/16" to 1/2".Standard...

For ground wire application with galvanized steel cable with or without armor rods. Type MS may also be used to suspend copper or Copperweld® cable. Magnetic induction heating will occur. Std. Pack: 50 ea. L6-7/16" x H2" x W 7/8". Weight: 2.65 lbs.. 16,000 lb. Strength. Steel Cable 7 Strand, Clamp Range: .20"-.60".

Hot dip galvanized. Used to interlock strand loops from 3/16" (6M) to 1/2" (25M). Standard Quantity: 10ea.

Provides a mechanical means for bonding various sizes of copper ground wire.Manufactured from high strength Bronze alloy. The H1 connector bonds a #6-10 AWG to #4-6 AWG ground wire. The H2 connector bonds a #4-12 AWG to #8-1/0 AWG ground wire.Standard Package: 100 each.

Provides a mechanical means for bonding various sizes of copper ground wire.Manufactured from high strength Bronze alloy. The H1 connector bonds a #6-10 AWG to #4-6 AWG ground wire. The H2 connector bonds a #4-12 AWG to #8-1/0 AWG ground wire.Standard Carton: 250 each. (5 packs of 50 each.

Used to make a bonding connection between two copper ground wires.Bolt and nut formed from high-strength corrosion resistant C210 Copper. Specially designed pressure bar provides high pull-out strength. Under torque, provides high contact pressure between ground wires. Smallest two conductors accepted: 10 Sol. Largest two conductors accepted: 6 Sol. Min. wire size that can be used with Max. wire size: 16 Sol. Tested and UL listed to UL486A requirements.Standard Carton: 100 each. (4 packs of 25...

Designed to securely grip messenger cable. Clamps accept 1/4" (6.6M) to 7/16" (16M) messenger strand. Made from rolled, high quality steel, hot dip galvanized per ASTM A153 for maximum corrosion protection. Furnished with two 1/2" track bolts and square nuts. Mount messenger assembly to pole with a 5/8" bolt thru center hole. Standard Package: 100 each.

99.9% pure electrolytic copper coatingMolecular bond to nickel-sealed high strength steel coreRods have a high carbon steel core and tip that provide superior strength when drivingCopper coating will not crack when bent or tear when drivenMinimum copper coating of 10 mils on rods listed to UL® 467ERICO® name, length, diameter and part number is roll-stamped within 12" (304,8 mm) of chamfered endUL logo and control number where applicable stamped on each rod for easy inspection after...

Meets ANSI®/NEMA® GR1. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion, in accordance with ASTM® specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects.  Standard Package: 10 each.

Copperweld, UL Listed. Standard Package: 10 each.