Bolts - Other

Used to secure two cable suspension clamps or other attachments on opposite sides of utility pole.Each Double Arming Bolt is supplied with four attached square nuts. Bolt provided with cone point at each end to ease starting. Hot dip galvanized to meet ASTM Specification A153. Minimum tensile strength: 13,550 lbf. Recommended torque value: 73 ft lb.Standard Package: 40 each.

Used to secure two cable suspension clamps or other attachments on opposite sides of utility pole.Each Double Arming Bolt is supplied with four attached square nuts. Bolt provided with cone point at each end to ease starting. Hot dip galvanized to meet ASTM Specification A153. Minimum tensile strength: 13,550 lbf. Recommended torque value: 73 ft lb.Standard Package:  35 each.

Used to secure two cable suspension clamps or other attachments on opposite sides of utility pole.Each Double Arming Bolt is supplied with four attached square nuts. Bolt provided with cone point at each end to ease starting. Hot dip galvanized to meet ASTM Specification A153. Minimum tensile strength: 13,550 lbf. Recommended torque value: 73 ft lb.Standard Package:  30 each.

Used to secure two cable suspension clamps or other attachments on opposite sides of utility pole.Each Double Arming Bolt is supplied with four attached square nuts. Bolt provided with cone point at each end to ease starting. Hot dip galvanized to meet ASTM Specification A153. Minimum tensile strength: 13,550 lbf. Recommended torque value: 73 ft lb.Standard Package:  30 each.

Used to secure two cable suspension clamps or other attachments on opposite sides of utility pole.Each Double Arming Bolt is supplied with four attached square nuts. Bolt provided with cone point at each end to ease starting. Hot dip galvanized to meet ASTM Specification A153. Minimum tensile strength: 13,550 lbf. Recommended torque value: 73 ft lb.Standard Package:  20 each.

Used to secure two cable suspension clamps or other attachments on opposite sides of utility pole.Each Double Arming Bolt is supplied with four attached square nuts. Bolt provided with cone point at each end to ease starting. Hot dip galvanized to meet ASTM Specification A153. Minimum tensile strength: 13,550 lbf. Recommended torque value: 73 ft lb.Standard Package: 20 each.

Used to secure two cable suspension clamps or other attachments on opposite sides of utility pole.Each Double Arming Bolt is supplied with four attached square nuts. Bolt provided with cone point at each end to ease starting. Hot dip galvanized to meet ASTM Specification A153. Minimum tensile strength: 13,550 lbf. Recommended torque value: 73 ft lb.Standard Package:  20 each.

Used to secure two cable suspension clamps or other attachments on opposite sides of utility pole.Each Double Arming Bolt is supplied with four attached square nuts. Bolt provided with cone point at each end to ease starting. Hot dip galvanized to meet ASTM Specification A153. Minimum tensile strength: 13,550 lbf. Recommended torque value: 73 ft lb.Standard Package:  15 each.

Used for dead-ending and attaching guy wires to poles and crossarms.Manufacture's marking (ABI) appears on unthreaded section of each bolt and is registered with the U.S. Patent Office per the Fastener Insignia Act.Allied Bolt marking (ABI) appears on each bolt.Supplied with cone point to ease assembly with nut.Supplied with an attached square nut.Hot dip galvanized to meet ASTM Specifications A153. Minimum thread length is 4". Recommended torque value: 73 ft lb. Minimum Tensile Strength:...

Used for dead-ending and attaching guy wires to poles and crossarms.Manufacture's marking (ABI) appears on unthreaded section of each bolt and is registered with the U.S. Patent Office per the Fastener Insignia Act.Allied Bolt marking (ABI) appears on each bolt.Supplied with cone point to ease assembly with nut.Supplied with an attached square nut.Hot dip galvanized to meet ASTM Specifications A153. Minimum thread length is 6". Recommended torque value: 73 ft lb. Minimum Tensile Strength:...

Used for dead-ending and attaching guy wires to poles and crossarms.Manufacture's marking (ABI) appears on unthreaded section of each bolt and is registered with the U.S. Patent Office per the Fastener Insignia Act.Allied Bolt marking (ABI) appears on each bolt.Supplied with cone point to ease assembly with nut.Supplied with an attached square nut.Hot dip galvanized to meet ASTM Specifications A153. Minimum thread length is 6". Recommended torque value: 73 ft lb. Minimum Tensile Strength:...

Used for dead-ending and attaching guy wires to poles and crossarms.Manufacture's marking (ABI) appears on unthreaded section of each bolt and is registered with the U.S. Patent Office per the Fastener Insignia Act.Allied Bolt marking (ABI) appears on each bolt.Supplied with cone point to ease assembly with nut.Supplied with an attached square nut.Hot dip galvanized to meet ASTM Specifications A153. Minimum thread length is 6". Recommended torque value: 73 ft lb. Minimum Tensile Strength:...